top of page
Car Interior

Automotive felts

Lacus Felt provides various felts that are used within the Automotive industry. These felts can be found within the cabin or the exterior of a vehicle. These can be, but not limited to: Internal dash insulators, door trim insulators and headliners, to engine insulators, bonnet liners and wheel arch liners. The felts manufactured by Lacus felt are produced with a wide ranging of fibre pallet meaning felts can be produced many different materials.

Semi-cured - Felt for moulding (Phenolic Resin or Epoxy Resin)

Semi-Cured with Fibre Glass - Felt for moulding (Phenolic Resin)

Fully-Cured - Felt for sound insulating / Die-cut (Phenolic Resin or Epoxy Resin)

IMG_6553_edited.jpg
Semi-cured

​Felts slightly bonded by uncured resin (for thermomoulding mats; optional scrims).

750g01_edited_edited.jpg

Felts with fibre glass content slightly bonded by uncured resin (for thermomoulding mats; optional scrims)

Semi-Cured with Fibre Glass
Fulled-Cured

​Felts bonded by cured resin (mainly sound damping applications) roll, bale or die-cut pieces with optional scrim and/or other adhesive)

Fibre reinforced Thermoplastic - Felt for moulding or die-cut / insulating

Fibre reinforced Thermoplastic with Epoxy resin - felt for mouldng

Polyester felts

Fibre reinforced Thermoplastic

Fibre reinforced thermoplastic (mainly sound damping applications which can come in roll, bale or die-cut format with optional scrim and/or adhesive)

Fibre reinforced Thermoplastic with Epoxy resin

Fibre reinforced thermoplastic with additional epoxy resin binder (mainly sound damping applications which can come in roll, bale or die-cut format with optional scrim and/or adhesive)

IMG_5961.JPG
Polyester Felt

Fibre reinforced thermoplastic felts composed of polyester bi-component binders and virgin or recycled polyester fibres.

Needlepunched Felt

Needlepunch Felt

Felt made of textile fibres and thermoplastic needle punched fibres, optional with nonwoven. Raw material for parts shaped in a cold mould after heating.

Carded Felt

Carded Felt

Felt made of textile fibres, bonded by thermoplastic binder, optional with nonwoven and / or adhesive. Raw material for parts shaped in a cold mould after heating and die-cut

Finished parts

Die-cut - Supplied or end customer

Moulded Felt - End customer

Die-cut

Felts produced have the option to be adhesive coated and/or die-cut into requested shapes stipulated by the customer. Each die-cut part will require a bespoke tool to be made to allow cutting.

IMG_6373_edited.jpg

Felts produced within Lacus Felt (Tier 2) are then passed to the next stage in the process to the Tier 1 customer, who will either die-cut or mould into the desired shape and rigidity for supply to the OEM involved.

Moulding
bottom of page